{"id":3853,"date":"2022-10-26T16:26:53","date_gmt":"2022-10-26T16:26:53","guid":{"rendered":"https:\/\/amazonsoftwares.com\/dev\/familyhealthproduct\/?p=3853"},"modified":"2022-10-26T16:33:02","modified_gmt":"2022-10-26T16:33:02","slug":"chlorine-dioxide-household-uses","status":"publish","type":"post","link":"https:\/\/familyhealthproducts.com\/index.php\/2022\/10\/26\/chlorine-dioxide-household-uses\/","title":{"rendered":"Chlorine Dioxide Household Uses"},"content":{"rendered":"

Chlorine Dioxide for Household Uses<\/p>\n

CHLORINE DIOXIDE FOR HOUSEHOLD USES<\/p>\n

We must preface this article with the statement that none of our products are registered with the E.P.A. Therefore we cannot claim that any of our products kill, disinfect or sanitize in any way. Our CD Kits are sold as surface treatments, to clean, deodorize, and promote a healthier environment. This article is for informational and educational use. I will add to it as I have time, and would welcome any uses you may have that are not listed here.<\/em><\/p>\n

Chlorine DIoxide can replace a variety of cleaning products currently found in most households. Chlorine based products can create other toxic byproducts , and many anti bacterial products can create germs that are more resistant to drugs. Detergents can contain chemicals and toxins that people may be sensitive to.<\/p>\n

Chlorine DIoxide is a sensible alternative to cleaning with many of these products.<\/p>\n

More information on the characteristics and applications for Chlorine Dioxide are readily available on the Internet. Companies such as DuPont, Lenntech, and Oxychem specialize in Chlorine DIoxide products and applications for drinking water, use as a sterilizer and disinfectant, food and agriculture, removal of biohazards, and more.<\/p>\n

KVlabs standard 4 oz CD-Kit will contain about 2400 drops. A drop is usually between 1\/20th and 1\/25th of a milliliter.<\/p>\n

Using the activators and stoichiometric ratios for our CD-Kits, 3 drops of each Part A and Part B, activated for 30 seconds will usually produce between 25 and 35 ppm of Chlorine Dioxide in 4 oz (120ml) of distilled water.<\/p>\n

There will always be variables to take into consideration, so this is to be used as a general guide. If exact measures are needed, you can test your solution with Chlorine Dioxide test strips. These are available through Amazon and Grainger supply.<\/p>\n

Most applications will require activation. This is done by first adding drops of sodium chlorite solution (Part-A) in the bottom of a small glass or plastic container. Add to this equal amounts of the activator solution (Part-B). Make sure the 2 parts mix. As activation occurs, the resulting solution will turn from pale yellow, to a darker amber. Activation time is 3 minutes. The container should be made from glass, HDPE plastic, or PET plastic. Most of the surface applications use a 15 ppm mild solution. An 8 or16 oz plastic spray bottle will work great for most applications.<\/p>\n

 <\/p>\n

APPLICATIONS<\/p>\n

Hard Surface Treatment
\nCounter Tops, Sinks, Shower, Tile, Tub, Toilet Rim, etc<\/p>\n

FOR A THOROUGH CLEANING OF HARD SURFACES
\nSTRONG SOLUTION\u00a0(approx 150 ppm CLO2)<\/p>\n

To get your hard surfaces sparkling clean, odor free, and environmentally friendly, activate 18 drops of sodium chlorite solution with 18 drops of the activator solution (Part B). Allow to activate for 3 minutes. Add 8 oz (240 ml) of distilled water. \u00a0Spray or wipe the solution on your hard surfaces, allow to stand for 10 minutes then wipe or rinse off. \u00a0You may also use this solution on mold and mildew, shower mats, and shower curtains, and garbage receptacles. This is a strong solution, and the smell will be noticeable. Care should be taken not to use in small contained areas. \u00a0The left over solution can be diluted for other applications such as daily cleaning solution., or can be stored in a dark cabinet and used for up to 20 days.<\/p>\n

FOR DAILY CLEANING OF HARD SURFACES
\nMILD SOLUTION\u00a0(approx 15 ppm CLO2)<\/p>\n

For day to day wiping down of clean areas, \u00a0a mild solution of CLO2 can be made. Just activate 8 drops of Part A with 8 drops of Part B, and allow it to activate for 3 minutes, and add 16 oz of water.Just spray directly on surface, and wipe off, no rinsing necessary You can use this mild solution daily for counter tops, sinks, walls, cutting boards, garbage\u00a0receptacles\u00a0and more. This solution will prevent odors, and keep the area environmentally friendly. You can also soak your sponges and kitchen utensils in any leftover solution to keep them fresh and clean, or it can be stored in a dark cabinet and used for up to 20 days<\/p>\n

Food Preparation
\nVegetable Rinse, Environmental Cleaning<\/p>\n

VEGETABLE RINSE
\nVERY MILD SOLUTION (approx 5 ppm CLO2)<\/p>\n

Prepare a rinse for your vegetables to wash of pesticides, and chemicals used in processing.
\nActivate 9 drops of Part A with 9 drops of Part B for each one gallon of water. Allow to activate 3 minutes before adding to water Use this solution to rinse or dip your veggies in. Allow to soak for 1 minute, Rinse well, cook and enjoy!<\/p>\n

CUTTING BOARD, KITCHEN UTENSILS, FOOD PREP EQUIPMENT
\nMILD SOLUTION (approx 15 ppm CLO2)<\/p>\n

Cutting boards, Counter tops, Kitchen Utensils, and Food prep equipment can be kept clean and environmentally friendly using the mild 15 ppm solution. This is made by activating 8 drops of\u00a0Part A & Part B\u00a0and adding it to \u00a08 oz of distilled water
\nSimply spray or wipe on, and that’s it. No rinsing required. No toxic byproducts left behind.<\/p>\n

COFFEE POTS, HOME BREWERIES, ICE MAKER WATER LINES
\n(MILD SOLUTION (approx 15 ppm CLO2)<\/p>\n

The same mild solution can also be used for cleaning coffe pots, Home breweries, Iced Tea Makers, and Ice machine lines. For coffemakers and Iced \u00a0machines, just fill the water tank and turn it on. Rinse by adding fresh distilled water, and running the cycle a couple of times. This will clean the system, and help to remove any biofilm. When cleaning ice machine lines , remember to turn off the water supply first. \u00a0Run the mild solution thru the lines and let it stay there a few minutes before rinsing.<\/p>\n

GLASSWARE, DISHES, STAINLESS STEEL SILVERWARE<\/p>\n

Soaking your dishes, glasses, and stainless steel silverware can help remove biofilm, grease, and leave everything clean and sparkling. Fill up your sink, add dishes, glasses, and silverware, activate 30 drops of PART A & PART B for 10 minutes and add to sink. \u00a0Let soak for 10 minutes or more. This will also help to clean the area between fork tines, where normal washing has a hard time.<\/p>\n

Deodorizing
\nGarbage Cans, Shoes, Laundry Hamper, Air Freshener<\/p>\n

GARBAGE CAN
\nMILD SOLUTION (approx 15 ppm CLO2)
\nSpray a mild solution in your garbage can when you change the bag to stop odors, and keep your trashcan clean.
\nA strong solution can be used for a thorough cleaning.<\/p>\n

SHOES, LAUNDRY HAMPER
\nMILD SOLUTION (approx 15 ppm CLO2)
\nFor really stinky shoes, you can use a 15 ppm mild solution, just spray in shoes and allow to dry.
\nFor day to day odor control, use a very mild 5 ppm.
\nSpray empty plastic hamper with a mild solution.
\nIf you have a wicker hamper use the 5 ppm very mild solution.<\/p>\n

AIR FRESHENER
\n( Approx 2 ppm)
\nAdd 1 or 2 drops of Part A & Part B to 16 oz of distilled water in a fine mist spray bottle.
\nUse as you would any air freshener to eliminate odors. No scent, no chlorine smell at this strength.<\/p>\n

Water Applications
\nWater Storage, Emergency Water Treatment<\/p>\n

POTABLE WATER STORAGE
\nBe sure container is clean. Add 2 drops of Part A for each gallon.\u00a0DO NOT ACTIVATE<\/em><\/strong>
\nSeal tightly. Water will stay fresh, taste great, and be odor free.
\nWhen you open the water. Add 1 drop for each remaining gallon and reseal.<\/p>\n

NON – POTABLE WATER STORAGE
\nClean tank with a strong solution. Rinse well. \u00a0Fill with water and add 2 drops of Part A per gallon of supply.\u00a0DO NOT ACTIVATE<\/em><\/strong>. This can apply to water systems for horticulture, rain barrels, and agricultural water tanks.
\nSee Chlorine DIoxide application chart for more details.<\/p>\n

EMERGENCY WATER TREATMENT
\nWater from a suspect source<\/p>\n

In an emergency situation, Chlorine Dioxide can help suspect water supplies to be more environmentally friendly.<\/p>\n

FOR WATER ON DEMAND<\/p>\n

Activate 4 drops of Part A & Part B and let activate for 10 minutes. Add to 1 gallon of water.\u00a0Wait at least one hour before using.<\/p>\n

BEST METHOD:\u00a0\u00a0Use 3 to 4 drops of of Part A \u00a0to 1 gallon of water and let stand at least 12 hours\u00a0DO NOT ACTIVATE<\/em><\/strong><\/p>\n

Please note these directions are only for emergency situations. EPA registered Chlorine Dioxide water treatments are readily available.<\/em><\/strong><\/p>\n

Pets
\nWater, Deodorizer, Skunk Odor<\/p>\n

WATER TREATMENT
\nAdd a drop of Part A to your pets water bowl to keep the water and pets breath fresh.\u00a0DO NOT ACTIVATE<\/em><\/strong><\/p>\n

DOGGIE DEODORANT
\nUse 1 drop of Part A in 16 oz sprayer to keep your pet smelling good between baths.
\nAlso discourages biting and hotspots.<\/p>\n

SKUNK ODORS
\nAdd 20-40 \u00a0activated drops to Dogs bath, and soak for 10 to 20 minutes.
\nDo not get in eyes. After 10 to 20 minutes, rinse and bathe dog \u00a0normally.<\/p>\n

Make a Spray solution for the home and areas affected by mixing 8 drops of of Part A & Part B to 16 oz of water.
\nApprox 50-60 ppm CLO2.<\/p>\n

CUT FLOWERS
\nAdd a drop or two of Part A to your cut flowers water.
\nWill keep flowers fresher, and lasting longer.<\/p>\n

————————————————————————————————<\/p>\n

Atmospheric Treatments
\nThe applications from here will deal with atmospheric treatments.
\nThese applications include deodorizing spaces such as boats, cars, and rooms.
\nRather than using a spray or liquid, the idea is to create gas to fill the space.
\nThese are simply methods I use to good effect. Results may vary.<\/p>\n

AUTOMOBILE
\nUse a small plastic dish or bowl. Start your car, and start the AC or Fan, make sure outside vent is closed on the AC, so the air recirculates. \u00a0Put 40-60 drops of Part A. \u00a0Place bowl in center of car,on the floor in front. Pre- measure equal amount of Part B, add to the bowl with Part A, and quickly get out and close up car. Allow to run for 20 to 30 minutes. Open car doors, and allow concentrated gas to escape the car before you get in. Open vent to outside, and flush AC system with fresh air.<\/p>\n

BOATS<\/p>\n

Chlorine DIoxide is great for deodorizing boats.
\nFor every \u00a030 cubic feet of air space use 40 drops of Part A & Part B in \u00a0small plastic containers.
\nOpen the door to the head, open cabinets, and flip up mattresses if you have them. \u00a0Place the containers evenly spaced in the area. Add Part A to all containers first, then add pre-measured Part B into each one, starting furthest from your exit. Close the hatch, and allow to sit for at least 4 hours. Re- treat if needed. A small battery powered fan can be used to circulate the gas.<\/p>\n

AC DUCTS<\/p>\n

For a normal 3 bedroom house, (approx 2000 sq feet) \u00a0Activate 60-100 Drops of Part A & Part B in small bowl. Place in air return of AC System. (Behind Filter) Turn on air, and close up the house. Let run a couple hours. Air out the house, and discard the spent solution.Discourages mold and mildew in your ducts, and freshens your home in one treatment.
\nYou can also run 10-20 drops any time for a freshness boost.<\/p>\n

CLOSETS, ROOMS, CLOSED AREAS
\nUse 100 activated drops in your closet or small room \u00a0to remove musky odors, and help prevent mold and mildew.
\nUse 40 drops in bowls in each corner of room to deodorize the area.<\/p>\n

MOLD AND MILDEW ON INTERIOR WALLS
\nNOTE: If mold is inside of walls, the interior space will also need to be treated. This usually means holes in your wall.
\nFumes will be pretty heavy, do not linger, prepare everything a head of time. The fumes do not form quickly, but as I said, don’t linger too long. This will not remove the stains caused by the mold.<\/p>\n